
DPM Argedent 90 (PFM)
Turn Around Time:
72 Hours
DPM Argedent 90 is a rich yellow, High Noble, ceramic veneering alloy, containing 90% Gold, which provides both strength and esthetics for fixed prosthetics. With exceptional biocompatibility, these alloys are universally compatible with all porcelain.
COMPOSITION
Gold (AU)- 89.5
Platinum (PT)- 5.8
Palladium (PD) -1.6
Silver (AG)-1.2
Copper (CU)-0
Zinc (ZN)- 0
Tin (SN)- 0.8
Indium (IN)- 0.4
Gallium (GA)- 0
PHYSICAL PROPERTIES
VHN After Firing-125
VHN Soft-
VHN Hard-140
Proof Stress Soft MPa-201
Proof Stress Hard MPa-224
Tensile Strength Soft MPa-319
Tensile Strength Hard MPa-332
Elongation Soft-15
Elongation Hard-10
Elastic Modulus GPa-85
THERMAL PROPERTIES
Melting Range C 1040-1155
Casting Temp C- 1300
Density g/cc-18.8
Expansion at 500C- 14.7
Expansion at 600C- 15
Burnout Temp C- 790
Argen Argenco 58+ (Crown & Bridge Alloy)
Turn Around Time:
72 Hours
DPM Argenco 58 is a High Noble gold full cast alloy with a rich yellow color. It offers outstanding biocompatibility and is available up to 3 units through the digital workflow.
-
58% Gold, 27% Silver
-
Rich Yellow Color
-
Available in the Digital Workflow
-
Up to 3 Units
Color: Yellow
Type: 3/4
ADA Classification: HIGH NOBLE (HN)
COMPOSITION
Gold (AU)-58
Platinum (PT)-0
Palladium (PD)-3.25
Silver (AG)-27
Copper (CU)-10.49
Zinc (ZN)-1
Tin (SN)-0
Indium (IN)-0.25
Gallium (GA)-0
PROPERTIES
VHN After Firing—
VHN Soft- 145
VHN Hard- 210
Proof Stress Soft MPa- 290
Proof Stress Hard MPa- 550
Tensile Strength Soft MPa- 450
Tensile Strength Hard MPa- 621
Elongation Soft- 28
Elongation Hard- 10
Elastic Modulus GPa- 83
Argen DPM Y+ (Crown & Bridge Alloy)
Turn Around Time:
72 Hours
2% reduced Gold restoration for crowns and bridges
Color: Yellow
Type: 3, Full Cast
ADA Classification: Noble (N)
PGM: 36.95%
Composition:
Pd 34.9%
Ag 30%
In 30%
Zn 3%
Au 2%
Properties:
Vickers Hardness (VHN)- 34.9%
Yield Strength (0.2% offset)- 43,000 psi / 297 MPa)
Modulus of Elasticity (GPa)- 51
Elongation- 5%
Density- 10.5g cm3
Argen Argedent Euro (High noble):
Turn Around Time:
72 Hours
Argen Argadent Euro (High Noble) 40% reduced Gold for ceramics
Color: White
Type: 4, PFM
ADA Classification: Noble (N)
PGM: 36.95%
Composition
Pd- 39.4%
Ag- 10%
In- 8.8%
Ga- 1.4%
Au- 40%
Properties:
Coefficient of Linear Thermal Expansion: 25-500
14.1 / 25-600 14.4 (um/m-C)
Vickers Hardness (VHN)- A.F. 260 / Hard 290
Yield Strength (0.2% offset)- (A.F. 79,800 psi / Hard 550MPa) (78,300 psi / 540MPa)
Modulus of Elasticity (GPa)- 125
Elongation- A.F. 15% / Hard 9
Density- 12.8g cm3
Argen NobleBond (PFM)
Turn Around Time:
72 Hours
Argen NobleBond (PFM) is the most economical NOBLE alloy for PFM restorations. This unique alloy is silver-free with universal porcelain compatibility for regular fusing porcelains. How is NobleBond classified as Noble?
The ADA classification system defines Noble as alloys that have at least 25% or more of gold plus the platinum group elements. Ruthenium is one of the platinum group elements.
Why is NobleBond important now?
The high price of palladium has resulted in challenging prices on what used to be low cost palladium silver alloys. Argen’s new NobleBond alloy is an answer to the high price of palladium and the daily fluctuating price.
Composition:
Ruthenium- 25%
Cobalt- 40%
Chromium- 24%
Gallium- 11%
Boron- TRACE
SPECIAL PROCESSING INSTRUCTIONS:
-
Since NobleBond contains 75% non-precious elements the alloy must be handled like a CoCr alloy. The ingots will not pool together when the
-
alloy is molten. The crucible should be preheated in the
burnout oven prior to casting.
-
Oxidation must be done under vacuum.
OPAQUE APPLICATION:
Fire a wash coat of opaque at 10-15°F (10°C) above
normal temperature, masking the alloy 60-70%,
followed by a regular opaque coat. Refer to the
porcelain manufacturer instructions for cobalt
base alloys. For Noritake Porcelain you must use
Base Paste (POBA).
SOLDERING OR LASER WELDING:
Use Co/Cr Pre for pre soldering. For laser welding
use LWNPCO. Post soldering is not recommended.
Argen Noble Crown NF (PFM)
Turn Around Time:
72 Hours
Argen Noble Crown NF (PFM) copings are created using 3D rapid prototype laser sintering technology.
Color: White
Type: 4, PFM
ADA Classification: Noble (N)
PGM: 25%
Advantages:
-
Warm color.
-
More homogeneous microstructure (>99%) than conventionally cast metal.
-
No tension in framework as opposed to cast metal.
-
Use same veneering porcelain as for conventional non-precious alloys (CTE 14.1).
-
Non-allergenic – Free of nickel and beryllium.
Composition:
Pd- 25%
Co- 42.75%
B- <1%
Mo- 12%
Cr- 20%
Properties:
Coefficient of Linear Thermal Expansion
- (25-500C/25-600C)- 14.1/14.8
Vickers Hardness (VHN)- 335
Yield Strength (0.2% offset)- 90,000 psi / 620 MPa
Modulus of Elasticity (GPa)- 192
Elongation- 4%
Density- 9.2g cm3
Argen NP (PFM)
Turn Around Time:
72 Hours
Argen NP (PFM) – CoCr Laser Sintered Alloy frameworks is used to create 3D rapid prototype metal printing technology. Color = White, Type = PFM, ADA Classification = Predominantly Base (PB), PGM = 0%
Advantages:
-
More homogeneous microstructure (> 99%) than conventionally cast metal
-
No tension in framework as opposed to cast metal
-
Same veneering porcelains as used with conventional non-precious alloys (CTE 14.1)
-
Non-allergenic – Nickel and beryllium “free”
Strategy Milling 55% Gold SM 55 (Crown & Bridge Alloy)
Turn Around Time:
72 Hours
Strategy Milling 55% Gold SM 55 – Milled full contour 55% gold crowns/bridges from Strategy Milling.
Composition:
Au- 55%
Pd- 5.2%
In- <1.0, lr <1.0
Ag- 30%
Cu- 9%
SPECIAL PROCESSING INSTRUCTIONS:
All milled 55% gold restorations are shipped with sprues still attached and require removal of sprues and polishing.
Strategy Milling 2% Gold SM 2 (Crown & Bridge Alloy)
Turn Around Time:
72 Hours
Strategy Milling 2% Gold SM 2 – Milled full contour 2% gold crowns/bridges from Strategy Milling.
Composition:
Ag- 34.30%
Pd- 32.70%
In- 28.00%
Zn- 2.60%
Au- 2.00%
Ir, Li, B, Cr- <1%
SPECIAL PROCESSING INSTRUCTIONS:
All milled 2% gold restorations are shipped with sprues still attached and require removal of sprues and polishing.

Alloys
Here at Complete Milling Lab we choose to carry products that we know and love. Reach out to us with any questions or check out our FAQ page. All alloys orders can be placed using the link below.
